Name: Phoenix PSR-SCP-24UC/ESAM4/2X1/1X2 2900525 Relés de seguridad
SKU: EMP0006510
Price: 178.6 USD
Availability: InStock

Detalles de producto

Fotos

Especificaciones

Maximum power dissipation for nominal condition	16.44 W (U_S = 26.4 V, I_L² = 72 A², P_Total max = 2.04 W + 14.4 W)
Nominal operating mode	100% operating factor
Air clearances and creepage distances between the power circuits
Rated insulation voltage	250 V
Rated surge voltage/insulation	See section “Insulation coordination”

General
Rated control circuit supply voltage U_S	24 V DC -15 % / +10 %
Power consumption at U_S	typ. 1.68 W (DC)
Rated control supply current I_S	typ. 70 mA
Input voltage range in reference to U_N	0.85 … 1.1
Typical input current at U_N	70 mA DC (at Us)
Corriente de irrupción	< 3.5 A (Δt = 3 ms at U_s)
	< 100 mA (Δt = 500 ms, with U_s/I_x at S12)
	> -100 mA (Δt = 300 ms, with U_s/I_x at S22)
	< 6 mA (with U_s/I_xto S34)
	< 6 mA (with U_s/I_xto S35)
Consumo actual	typ. 38 mA (S12)
	typ. -38 mA (S22)
	typ. 0 mA (with U_s/I_xto S34)
	typ. 1 mA (with U_s/I_xto S35)
Voltage at input/start and feedback circuit	approx. 24 V DC
Filter time	5 ms (at A1 in the event of voltage dips at U_s)
Filter time	No test pulses permitted
Typical response time	100 ms (Monitored/manual start)
Typical response time	150 ms (automatic start)
Typ. starting time with U_s	250 ms (when controlled via A1)
Typical release time	20 ms (on demand via the sensor circuit)
Typical release time	45 ms (on demand via A1)
Concurrence	∞
Recovery time	1 s (following demand of the safety function)
Recovery time	< 1 s (Boot time)
Circuito de protección	Surge protection; Suppressor diode
Max. permissible overall conductor resistance	approx. 50 Ω (Input and start circuits at U_S)
Operating voltage display	Green LED
Status display	LED (green)

Contact switching type	2 enabling current paths
Contact switching type	1 signaling current path
Contact material	AgSnO₂, + 0.2 µm Au
Maximum switching voltage	250 V AC/DC
Minimum switching voltage	10 V AC/DC
Limiting continuous current	6 A (Observe derating and load limit curve)
Corriente de irrupción máxima	6 A
Inrush current, minimum	10 mA
Sq. Total current	72 A² (Enabling current paths)
Sq. Total current	36 A² (Signaling current path 31/32)
Interrupting rating (ohmic load) max.	see load limit curve
Switching capacity min.	100 mW
Switching capacity in accordance with IEC 60947-5-1	6 A (DC13, enabling current paths)
	5 A (AC15, enabling current paths)
	2 A (DC13, signaling current paths)
	1.5 A (AC15, signaling current paths)
Output fuse	10 A gL/gG (Enabling current paths)
	4 A gL/gG (Low-demand enabling current paths)
	6 A gL/gG (Signaling current path)

descripción_de_sus_requisitos:

correo_electrónico *